Autoclaved Aerated Concrete - AAC Blocks
 Hotline: +84 939 53 00 90. Email: aacblock@gmail.com

Thin bed Mortar & Plastering

Thin bed Mortar

White thin bed mortar

  1. Fineness: Biggest particle size ≤ 0.6mm (TCVN: ≤1.25mm)
  2. Water ratio: 26± 1%
  3. Flow: 180mm (TCVN: 190 – 220mm)
  4. Bunk density: ~ 1,400 kg/m3
  5. Compact density: ~ 1,830 kg/m3
  6. Setting time: 260 minute (TCVN: > 180 minute)
  7. Correction time: 4-5 minute made on AAC brick at site, ~ 25 minute made on AAC brick in laboratory conditions.
  8. Compressive strength: 12 -15 Mpa (after 28 days). In TCVN, there are many types of MAC: from MAC2.5 to MAC12.5. Our thin-bed mortar has the highest MAC in the standard level.
  9. Flexural bond strength (on normal concrete surface): 0.8 – 1.2 Mpa

(TCVN: > 0.4 Mpa)

Plastering

  1. Fineness: Biggest particle size ≤ 0.6mm (TCVN: ≤1.25mm)
  2. Water ratio: 19± 1%
  3. Flow: 170-180mm (TCVN: 180 – 210mm)
  4. Bunk density: ~ 1,450 kg/m3
  5. Compact density: ~ 1,800 kg/m3
  6. Setting time: ~240 minute (TCVN: > 180 minute)
  7. Correction time: 15-17 minute made on AAC brick at site
  8. Compressive strength: 9 -12 Mpa (after 28 days). In TCVN, there are many types of MAC: from MAC2.5 to MAC12.5. Our Plastering has the MAC in 10Mpa.
  9. Flexural bond strength (on normal concrete surface: 0.6 – 1.0 Mpa

(TCVN: > 0.4 Mpa)

TCVN: Viet Nam Standard ]

Dry ready mixed mortar is a blend of Portland cement, dust, sand (for construction which has been purified and dried) and additives, formulated to produce a cohesive material with consistent workability and strength to reduce surface cracking. Compared with regular mortar, sand and dust used for production has been purified and made dry before being used for manufacture, as well as some additives well- mixed up together. Therefore, dry mixed mortar do not have impurities anymore, gives high aesthetic to the construction, surfaces with dry mixed mortar is smoother.

Dry ready mixed mortar is produced under strict manufacturing standards and complete quality control is in effect with each batch designed to meet the project specification and Vietnamese standards TCVN 4314 : 2004.

Thin bed mortar & Plastering advantages:

  • Reduce space and time of construction.
  • Reduce cost limited by the minimum amount of the excess mortar construction.
  • Keep clean and tidy on site.
  • Easy to carry and handle
  • Easy to control quality as well as quantity of construction.

Uses Thin bed mortar & Plastering: 

  • Mortar for binding bricks or stones together.
  • General plastering.
  • Stucco for Coating for exterior walls, interior walls, moldings, or decorative purposes

Gray thin bed mortar

AAC Blocks Waterproof (Water-proof)

AAC Blocks waterproof

AUTOCLAVED AERATED CONCRETE Lintels

AAC Lintels

Autoclaved Aerated Concrete Blocks

AAC Blocks

Autoclaved Aerated Concrete AAC Blocks  AAC U Blocks  AAC Lintels  AAC Wall panels  AAC Floor panels  - in decal AAC Roof Panels  -   dinh vi gps  -   Aerated Concrete Block , Chữa tủy răng, Phục hình răng,  - Aerated Concrete Blocks - do thi sala- mủ bảo hiểm- mũ bảo hiểm-cho thue the estella - ban can ho estella

Autoclaved Aerated Concrete - TRIEU CUONG AAC Located at 101 Hoang Hoa Tham Street - Ward 13 - Tan Binh Dist - HCM City - Vietnam, Ho Chi Minh, VN. Reviewed by More 2000 customers. Rated: 9/ 10 (Excellent)